SX210 Microprocessor Digital Timer
Economical - Electronic - Single Setpoint Rest Timer
8 Time Ranges - 8 Operating Modes
The SX210 timer is a microprocessor based digital timer housed in a standard DIN style case (68mm square cutout). The small case and front bezel require minimal panel space yet provide large, easy to use programming keys and a .3 inch high LED display.
- Eight programmable time ranges and eight output operating modes
- Operating modes and all other setup functions programmed with miniature rocker switches located on the back of the housing
- Nonvolatile RAM memory retains setpoint, actual time values, and program parameters (10 year expected life of data in memory)
- NEMA 4 Hosedown Test rated
- Special surface just below the display on which the function can be marked with pen or pencil
- SET and ENT keys provide access to setpoint and front panel programmed functions
- Programming changes entered via increment and decrement keys
- Keypad "lock" function allows setpoint to be viewed, but does not allow unauthorized changes
- Four .3 inch red LED displays for easy readability
- Flashing LED (right side of display) indicates unit is in timing cycle and LED (left side of display) lights when programmed contacts are energized
- Two removable terminal blocks with screw gate style wire clamps permit prewiring of panel without the timer in place and eliminate rewiring if unit needs to be removed or replaced
- Two DPDT relay outputs with five amp contact ratings - one is a set of instantaneous contacts that energize when timing cycle starts and remain energized until timer is reset, and the other is a set of programmable contacts that can be programmed to turn on and off in several operating modes
Complete Specifications 